Industrial Valves

Product Details:

Stainless Steel Needle Valves are designed in integral bonnet and screwed bonnet in a compact way to accommodate in very small space. 

There are available in different configuration of end connections as given below:

• Integral bonnet and Screwed Ends 
• Integral bonnet and Double Ferrule ends 
• Screwed Bonnet design female ends
• Screwed Bonnet design Male x female ends
• Screwed bonnet double ferrule ends
• Screwed bonnet angle type 

It is used for isolation, throttling, sampling etc. It can be used with pipe and tube with matching end connections.

Product Details:

Dual Plate Check Valves are quarter-turn valves used to stop the flow of medium in pipelines. ... This support is in the shape of a shaft and is called a trunnion. The trunnion absorbs any added pressure from the flow, reducing stress on the ball and seats of the valve.

Product Details:

Double Offset Butterfly Valves are quarter-turn valves used to stop the flow of medium in pipelines. ... This support is in the shape of a shaft and is called a trunnion. The trunnion absorbs any added pressure from the flow, reducing stress on the ball and seats of the valve.

Product Details:

Forged Globe Valves are used for start, regulate and stop the flow of inside piping fluid or any other medium. Currently there are many types of globe valves available in the industry depending on its construction and features.

Product Details:

Forged gate valve is manufactured from finest quality components and under the firm direction of experienced quality controllers.

Product Details:

Plug valves are valves with cylindrical or conically tapered "plugs" which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open.

Product Details:

Trunnion Mounted Ball Valves are quarter-turn valves used to stop the flow of medium in pipelines. This support is in the shape of a shaft and is called a trunnion. The trunnion absorbs any added pressure from the flow, reducing stress on the ball and seats of the valve.

Production Type

• Side Entry / Top Entry
• Full Bore / Reduced Bore
• Cast / Forge
• 2Pc / 3Pc Design
• Bolted Body / Welded Body
• Soft Seated / Metal Seated

Design Features

• Anti-Static Design
• Anti-Blow out Stem
• Double Block & Bleed
• DIB-1 & DIB-2 Configuration
• Self Relieving / Non-Relieving Seats
• Drain & Vent Connections
• Sealant Injection in Seats & Stem

Industries

• Oil & Gas Industry
• Pipeline & Process Industry
• Power Industry
• Refinery & Petrochemical Industry
• Chemical Industry

Product Details:

Knife Gate Valves are designed to work in some of the most harsh environments, typically having a sharpened blade to cut through heavy liquids. They are especially useful in wastewater applications where corrosion is an important issue.

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

A Gate Valve is generally used to completely shut off fluid flow or, in the fully open position, provide full flow in a pipeline. Thus it is used either in the fully closed or fully open positions. A gate valve consists of a valve body, seat and disc, a spindle, gland, and a wheel for operating the valve..

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

Double Block Bleed Valve can perform the functions of 3 separate Valves i.e. 2 separate isolations and 1 drain Valve, thereby saving space, weight and installation time and maintenance work.

This valve is operating on the principle that the isolation can be done from both side i.e. upstream and downstream.

Different configurations of designs are available such as two ball, gate, globe, needle, etc. Valves are located in a series configuration with the third valve used as bleed valve in the centre cavity.

Product Details:

Forged Check Valves are simple and cost effective. Swing check valves are the most common check valves.

Product Details:

A swing check valve is mounted with a disc that swings on a hinge or shaft. The disc swings off the seat to allow forward flow and when the flow is stopped, the disc swings back onto the seat to block reverse flow. The weight of the disc and the return flow has an impact on the shut-off characteristics of the valve.

Product Details:

Triple offset butterfly valves (TOV) have three separate offsets as shown in the picture above to the right. Two offsets are placed from the center while the third is on the seating surface which creates a cone type shape of the disc and seat

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

Forged Check Valves are simple and cost effective. Swing check valves are the most common check valves.

Product Details:

Knife Gate Valves are designed to work in some of the most harsh environments, typically having a sharpened blade to cut through heavy liquids They are especially useful in wastewater applications where corrosion is an important issue.

Product Details:

Triple offset butterfly valves have three separate offsets as shown in the picture above to the right. Two offsets are placed from the center while the third is on the seating surface which creates a cone type shape of the disc and seat.

Product Details:

A piston valve is a device used to control the motion of a fluid along a tube or pipe by means of the linear motion of a piston within a chamber or cylinder. Examples of piston valves are: The valves used in many brass instruments. The valves used in pneumatic cannons.

Product Details:

Globe Valves is a linear motion valve used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During the opening and closing of the valve, the disc moves perpendicularly to the seat..

Product Details:

Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

Features:-

• Bolted Cover Design 
• Drain Plug & Lower Pressure Drop Design 
• Flat seated screen for proper seating 
• Low-pressure drop across the filter 
• Compact size & low weight 
• Detachable mesh 
• Back Washing 

Product Details:

A Gate Valve is generally used to completely shut off fluid flow or, in the fully open position, provide full flow in a pipeline. Thus it is used either in the fully closed or fully open positions. A gate valve consists of a valve body, seat and disc, a spindle, gland, and a wheel for operating the valve.

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

In a floating ball valve, the ball is held in the position by the compression of the two elastomeric seats against the ball. The ball is free to float inside the valve body. ... This type of valve design is capable of bi-directional shut-off. The floating valve is very difficult to operate when upstream pressure is high.

Product Details:

Forged gate valve is manufactured from finest quality components and under the firm direction of experienced quality controllers.

Industry

• Oil & Gas Industry
• Forged Gate Valve Industries
• Process Industry
• Power Industry
• Refinery & Petrochemical Industry
• Chemical Industry

Product Details:

A swing check valve is mounted with a disc that swings on a hinge or shaft. The disc swings off the seat to allow forward flow and when the flow is stopped, the disc swings back onto the seat to block reverse flow. The weight of the disc and the return flow has an impact on the shut-off characteristics of the valve.

Product Details:

In a floating ball valve, the ball is held in the position by the compression of the two elastomeric seats against the ball. The ball is free to float inside the valve body. This type of valve design is capable of bi-directional shut-off. The floating valve is very difficult to operate when upstream pressure is high.

Floating Ball Valve

•  Full Bore / Reduced Bore
•  Cast / Forge
•  2Pc / 3Pc Design
•  Soft Seated / Metal Seated

Industry

• Oil & Gas Industry
• Pipeline & Process Industry
• Power Industry
• Refinery & Petrochemical Industry
• Chemical Industry

Product Details:

Forged Globe Valves are used for start, regulate and stop the flow of inside piping fluid or any other medium. Currently there are many types of globe valves available in the industry depending on its construction and features.

Product Details:

Globe Valves is a linear motion valve used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During the opening and closing of the valve, the disc moves perpendicularly to the seat.

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Product Details:

We "Maffs Valves And Fittings Private Limited" is one of the leading Manufacturer & Exporter of Industrial Valves, Instrumentation Valves, Carbon Steel Y Strainers and many more. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.